Synthesis of racemic 1,1′-bi-2-naphthol

Written by J.A Dobado | Last Updated on April 22, 2024

Objective

Synthesis of racemic 1,1′-bi-2-naphthol by an oxidative coupling reaction in aqueous media.

Synthesis of racemic 1,1'-bi-2-naphthol
Synthesis of racemic 1,1′-bi-2-naphthol

Background

1,1′-Bi-2-naphthol is a compound that can be used as a ligand for transition- metal. 1,1′-Bi-2-naphthol is an example of molecule that presents atropisomers. Enantiomeric pure complex of such derivatives can be used as a catalyst in some asymmetric syntheses but may undergo racemization upon heating. Racemic 1,1′-bi-2-naphthol can be prepared using iron(III) salts as an oxidant. The mech- anism involves a process of complexation of iron(III) with the hydroxyl group of 2-naphthol, followed by a radical coupling reaction of the naphthol rings started by iron(III) that is reduced to iron(II). In this case, the reaction is performed in water.

Experimental procedure

To a 100 ml Erlenmeyer flask, add a solution of FeCl3·6H2O (11.4 g, 42 mmol) in 40 ml of water and 2-naphthol (3 g, 21 mmol) finely powdered. Heat the Erlenmeyer in a water bath at 50 ºC for 2 h while stirring the mixture with a magnetic stirrer. Cool the resulting green suspension to room temperature and separate the solids by vacuum filtration. Dissolve the solid residue with 50 ml of CH2Cl2 and transfer the solution to a separatory funnel. Extract the organic solution with HCl 1 M (2 × 40 ml) and with water (2 × 40 ml) to remove the inorganic salts. Transfer the organic solution to an appropriate flask, and dry it with anhydrous magnesium sulfate. Remove the desiccant by gravity filtration, in a tared round-bottom flask. Eliminate the solvent under vacuum by rotary evaporator to recover a light-brown solid (1,1′-bi-2-naphthol), which can be purified by recrystallization from a minimum amount of hot toluene (estimated yield 70 %).

Physico-chemical properties

This table collects data for the molecular weight (Mw), melting point (M.p.) boiling point (B.p.) and density of the reactives and compounds used in this laboratory experiment.

Name Mw (g/mol) M.p. (ºC) B.p. (ºC) Density (g/ml)
CH2Cl284.93-9740.01.33
FeCl3·6H2O270.3280-285371.820
HCl 36.46-30>1001.200
MgSO4120.371124 -1.070
Toluene92.14-93110.60.867
β-Naphthol144.17120-122285-2861.280

GHS pictograms

Hazard pictograms form part of the international Globally Harmonized System of Classification and Labelling of Chemicals (GHS) and are collected in the followinf Table for the chemical compounds used in this experiment.

Name GHS
CH2Cl2 ghs08  Danger Warning Systemic health hazards pictogram
FeCl3·6H2O ghs05  Danger Warning Corrosive cat. 1 pictogram ghs07  Warning Toxic cat. 4 Irritant cat. 2 or 3 Lower systemic health hazards pictogram
HCl ghs05  Danger Warning Corrosive cat. 1 pictogram ghs07  Warning Toxic cat. 4 Irritant cat. 2 or 3 Lower systemic health hazards pictogram
MgSO4 Non-hazardous
Toluene ghs02  Danger Warning Flammable pictogram ghs08  Danger Warning Systemic health hazards pictogram ghs07  Warning Toxic cat. 4 Irritant cat. 2 or 3 Lower systemic health hazards pictogram
β-Naphthol ghs07  Warning Toxic cat. 4 Irritant cat. 2 or 3 Lower systemic health hazards pictogram ghs09  Warning (for cat. 1) (for cat. 2 no signal word) Environmental hazard pictogram

International Chemical Identifier

The IUPAC InChI key identifiers for the main compounds used in this experiment are provided to facilitate the nomenclature and formulation of chemical compounds and the search for information on the Internet for these compounds.

CH2Cl2YMWUJEATGCHHMB-UHFFFAOYSA-N
FeCl3·6H2ONQXWGWZJXJUMQB-UHFFFAOYSA-K
HCl VEXZGXHMUGYJMC-UHFFFAOYSA-N
MgSO4CSNNHWWHGAXBCP-UHFFFAOYSA-L
TolueneYXFVVABEGXRONW-UHFFFAOYSA-N
β-NaphtholJWAZRIHNYRIHIV-UHFFFAOYSA-N

References

Shares